Posted tagged ‘Wago’

Contract Manufacturing from Innovative-IDM: Electrical Control Panels, 508A, Pneumatic Assemblies

September 23, 2014

For more information, visit http://www.innovativeidm.com/

Do you need Electrical Control Panels, 508A, Kitting, Pneumatic Assemblies, Aluminum Extrusion work stations and assemblies? Have you run out of time and/or expertise and need help? Innovative-IDM contract manufacturing is a UL508A control panel shop among many other things. Adam Ring tells the story.

Innovative-IDM DFW Facility Tour: Multiple Ways to Help Your Manufacturing Facility

September 16, 2014

 

If you are an engineer or maintenance professional in an industrial manufacturing setting, Innovative-IDM has an entire facility of services and products that can help you, including 24-hour field service technicians.

We have a presence in Houston, DFW, Austin, San Antonio, Tulsa, OKC, Little Rock, Memphis, Baton Rouge, Mobile and other areas. Here is a quick tour of our DFW location.

If you’d like further information about our services, please go tohttp://InnovativeIDM.com and click on the knowledge center.

After all, Innovative IDM is the home of the legendary customer

How To Choose The Best Linear Motion Solutions For Your Applications

September 2, 2014

Hi, my name is Jack Marsh with innovative IDM and I’d like to talk a little bit about the different ways there are to produce motion to move stuff back and forth in industrial applications.

People often ask “what is the best technology for me to use in my application?”

Should I be using a ball screw? Should I be using a belt drive? Should I be using a rack and pinion?What about linear motors? and my answer to them, really is “it doesn’t matter.”

The important thing for you to decide, is what is your application? What do you need out of the solution and there’s really four things you need to focus on.

One: What is the overall travel, how far do you need to move your load?

Two: What kinda time frame do you need to do that in? Does it need to get from point A to point B in 10 seconds? Or does it need to get from point A to point B in a tenth of a second.

Very big difference.

The third thing is how much weight is getting moved? If it’s a few grams or a couple tons that naturally is going to point you to different technologies for the solution.

The last thing to consider is the precision. If you’re dealing with getting from point A to point B and stopping within a 1/16th or 1/8th of an inch, well that’s going to be a very different solution then needing to get there and stop to a micron level precision.

So once you’ve defined those four things, travel, time, weight and precision. Manufacturers already have the solutions mapped out for you.

The easiest thing to do is go to the catalogs take a look at the information that’s available there’s almost always a matrix of the different solutions and based on that criteria of precision, travel, weight you get to pick what you want.

So, it doesn’t really matter whether its a belt drive or ball screw as long as it meets what you need in your application. it’s going to work for you.

If you’d like to get this information from Parker please visit our website at http://InnovativeIDM.com and keep in mind that Innovative IDM is the home of the legendary customer experience.

Wago 750-493 3-Phase Power Measurement Module

July 23, 2014

No matter whether it is for plant automation, building automation or process automation: WAGO’s new 3-phase power measurement modules permit energy consumption measurement, harmonic analysis and N-conductor measurement for comprehensive network analysis – with fieldbus connection.

Wago 750-493 3-Phase Power Measurement Module

With the 750-493 3-Phase Power Measurement Module, WAGO has grown to become one of the major players in energy savings projects. We will be continuing to systematically pursue the strategy: Both 750-494 and 750-495 3-Phase Power Measurement Modules not only precisely measure energy consumption values of machines and systems, they also permit comprehensive network analysis via fieldbus, while providing the basis for an efficient energy management.

For each phase of a three-phase supply network, WAGO’s power measurement modules calculate the following energy and consumption data via rms values of current/voltage: Active energy/power/factor, phase position, reactive/apparent power, as well as rotary field detection, peak current and power factor. In supply networks, overlapping harmonic power oscillations may have a negative impact on connected loads. The 750-494 Module permits internal harmonic analysis up to the 40th harmonic.

For more information please contact us at http://innovativeIDM.com

Where we’re the home of the legendary customer experience.

Wago PCB terminal blocks

July 11, 2014

Series 2081 in pin spacing of 3.5 mm is the first choice for industrial applications up to 630 V.

Wago PCB terminal blocks

These compact terminal blocks with push-buttons are available as 2- to 6-pole and 8-, 10- and 12-pole straight and angled versions and are designed Thanks to the integrated push-buttons on the front, use of the PCB terminal blocks is easy and intuitive. Any type of wire can be connected and easily disconnected without the need for special tools. The CAGE CLAMP® S connection system also enables solid and fine-stranded conductors with ferrules to be connected by simply pushing them in. The 2081 Series is also suitable for THR soldering applications.

For more information please contact us at http://innovativeIDM.com

Where we’re the home of the legendary customer experience.

Wago High-Current Terminal Blocks

July 8, 2014

Wago High-Current_Terminal Blocks

Your benefits with the high-current terminal block

  • World’s first spring terminal for conductor cross-sections up to 185 mm2
  • 353 A, AC/DC up to 1000 V and DC up to 1500 V
  • Contact forces ensure optimal conductor contact at all times
  • Quick to connect without a lot of preparation
  • No turning of the screws with a torque wrench
  • Vibration-proof and maintenance-free connection technology

For more information or to order your Wago High-Current Terminal Blocks contact Innovative-IDM at 877-906-2100 or email us at info@iidm.com.

WAGO: X-COM S – 2022 Series

June 30, 2014

WAGO part

The 2022 series of X-COM®S offers a pluggable connection system to terminate up to 12 AWG wire. Available in 2, 3, and 4 conductor single deck blocks, as well as double deck versions, the 2022 series of X-COM®S  allows the system to be ‘prewired’ to save time and prevent wiring errors.

Give Innovative-IDM a call to order your Wago parts. You can reach us by phone at 877-906-2100 or email at info@iidm.com.