Posted tagged ‘A1000 drive’

Yaskawa Roadshow Training in San Antonio February 2015

January 26, 2015

The Yaskawa Drives Roadshow is coming to San Antonio in February for A1000 training. Call us at 877.906.2100 or send us an email at marketing@iidm.com to reserve your seat today!

Yaskawa A1000 Training San Antonio
February 20, 2015
8:30 – 4pm (lunch included)
$249 per seat

This will be hands-on programming training on the A1000 drive. All drives, motors, equipment is provided.  To see where the Yaskawa Drives Roadshow will be going next, check out our training page at innovativeidm.com/training.

Yaskawa A1000 training San Antonio February 2015

Yaskawa A1000 Training in Houston February 2015

January 21, 2015

The Yaskawa Drives Roadshow is coming to Houston in February for A1000 training. Seats will go fast, reserve yours today!

Yaskawa A1000 Training Houston
Two training dates to choose from!
February 17 or 18, 2015
8:30 – 4pm (lunch included)
$199 per seat

This will be hands-on programming training on the A1000 drive. All drives, motors, equipment is provided.  To see where the Yaskawa Drives Roadshow will be going next, check out our training page at innovativeidm.com/training.

Yaskawa A1000 training Houston February 2015

Yaskawa Application Overview: Grinder

January 6, 2015

Click here for the full “Application Overview: Grinder” from Yaskawa.

Yaskawa Grinder Application

Heavy cutting is done at slow speed. With a constant wheel pressure on the material to be shaped, the pounds/minute of material removed, or work done, varies with the wheel speed. This is the constant torque part of the profile. After the heavy cutting is complete, a polishing (light cutting) operation is performed. A high speed, lighter wheel-to-material pressure is maintained; therefore, less material in pounds/minute is removed. This is the constant horsepower part of the load profile.

Yaskawa AC drives have features that save energy, which allows the motor to run at optimal efficiency and precision when performing light grinding. Energy Saving Mode also reduces motor noise and stabilizes the load, perfecting the finishing process. Yaskawa AC drives can automatically detect changes to the amount of torque required during the shaping and finishing phases using Torque Detection. This feedback enables the drive to quickly detect changes as the grinding stone dulls or clogs. This can lead to significant cost savings by prolonging the life of grinding stones.

Innovative-IDM is your #1 Yaskawa supplier. Call us today at 877.906.2100 or send us an email at info@iidm.com.

Introduction to the Yaskawa A1000 Drive

December 30, 2013

This video shows the quality, performance, flexibility, and environmental friendliness of the A1000 drive.

Looking for training on the Yaskawa A1000 drive?  Check out the Innovative-IDM Training Page to see when the Yaskawa Drives Roadshow will be in your area.  Give us a call at 877.906.2100 or email info@iidm.com to sign-up for training today!

Yaskawa Application Overview: Lathe

August 2, 2013

Click here for the full “Application Overview: Lathe” from Yaskawa.

Yaskawa Lathe Applicaiton

A metal lathe usually spins the work piece along a horizontal axis. A mandrel or chuck is mounted to the headstock of the lathe. A follower block or tail block is mounted to the tailstock. A blank piece is clamped to the lathe and pressure is applied to the blank via a cutting tool. Material is cut away on each pass across the blank. After each pass, the lever arm is moved closer to the final position. Eventually, when the proper amount of material has been removed, the part is completed.

Yaskawa AC drives can be interlocked with the CNC control systems so the operation of the CNC controller and the AC drive are synchronized.

In addition, the Energy Saving Mode in Yaskawa AC drives automatically detect changes to the amount of torque required during shaping and finishing phases. This feedback enables the drive to quickly detect changes as the cutting tool becomes dull.

Call Innovative-IDM at 877.906.2100 or send us an email at info@iidm.com to order your Yaskawa A100o or G7 drives today!

Yaskawa VFD Training Mobile, AL February 24

February 10, 2012

Coming to Mobile, Alabama!  Yaskawa’s famous Road Show for drives training.  Stephen Whittaker of Yaskawa is your trainer.

A1000 Drive Training
February 24, 2012
8:30am to 4:00pm
$249 (includes catered lunch)

Where:  Hampton Inn & Suites I-65 @ Airport Blvd

Click here for more information.

This will be hands-on programming training on the A1000 drive.  All drives, motors, equipment is provided, as is lunch.  Seating is limited!  Call us at 877-906-2100 or email us at info@innidm.com to reserve your seat today!