Archive for the ‘New Product Release’ category

World’s First Spring Terminal for Conductor Cross-Sections up to 185 mm

July 31, 2015

WAGO’s new Power Cage Clamp high-current terminal blocks make it possible to connect conductors with cross-sections up to 185 mm with spring pressure connection technology. They are vibration-proof and maintenance-free, without having to rely on preparation intensive bolts or clamping yoke connection technology. Not only does this save a lot of time during cabling, but the high contact forces ensure an optimal and gas-tight contact at all times.

WAGO high current terminal blocks

For more information or to order the new WAGO Power Cage Clamp high-current terminal blocks, contact Innovative-IDM at 877.906.2100 or email us at info@iidm.com

Yaskawa Introduces New High Efficiency Drive

July 14, 2015

Yaskawa has introduced the U1000 Industrial Matrix Drive, it’s most efficient drive ever. The U1000 is second to none when it comes to power quality and energy savings.  Enjoy extremely low harmonic distortion and regeneration in a compact design without the need for additional components. Unlike conventional drives, Yaskawa’s matrix technology creates a variable output by switching directly from the input power (no DC bus). Make measurable efficiency gains while experiencing the outstanding performance of a Yaskawa industrial drive.

Yaskawa U1000 Industrial Matrix Drive

 

For a quote or more information about the new Yaskawa U1000 Industrial Matrix Drive, contact Innovative-IDM at 877.906.2100 or email us at info@iidm.com.

Omron STI New D40Z Compact, Non-Contact Interlock Switch

July 28, 2014

Omron STI Interlock Switch

Omron Scientific Technologies, Inc. introduces the D40Z Safety Interlock Switch. Up to 15 D40Z switches may be combined with the programmable G9SP Safety Controller, enabling these compact IP67-rated units to be used in a variety of high risk multi-door access applications. D40Z non-contact switches support ISO 13849-1 (Safety Category 4/PLe); and because up to 30 units can be connected to a single G9SX-NS Controller while still maintaining category 4/PLe compliance, they are an ideal safety solution for middle to large scale device applications.

For more information or to order your new Omron STI New D40Z Compact, Non-Contact Interlock Switch contact Innovative-IDM at 877-906-2100 or send an email to info@iidm.com.

Wago High-Current Terminal Blocks

July 8, 2014

Wago High-Current_Terminal Blocks

Your benefits with the high-current terminal block

  • World’s first spring terminal for conductor cross-sections up to 185 mm2
  • 353 A, AC/DC up to 1000 V and DC up to 1500 V
  • Contact forces ensure optimal conductor contact at all times
  • Quick to connect without a lot of preparation
  • No turning of the screws with a torque wrench
  • Vibration-proof and maintenance-free connection technology

For more information or to order your Wago High-Current Terminal Blocks contact Innovative-IDM at 877-906-2100 or email us at info@iidm.com.

Omron STI G7Z High Capacity Power Relay

April 11, 2014

Omron Scientific Technologies, Inc. introduces the G7Z high capacity power relay – a compact and powerful alternative in applications where bulkier and less efficient contactors have traditionally been used and consumed valuable panel space. Historically, conventional power relays have been limited to use in applications up to 25 A, but the rugged G7Z is designed and insulated to continuously apply up to 40 A at 440 VAC, or up to a maximum of 160 A using 4-pole parallel connections for full power application. The G7Z series is RoHS compliant and consumes less than 4 W DC power, and is approximately 40% smaller and 30% quieter when compared with traditional contactor solutions.

Omron STI, Power relays, G7Z high capacity power relay

If you would like more information or would like to order your G7Z high capacity power relay contact Innovative-IDM at 877-906-2100 or send us an email at info@iidm.com.

Omron New PLC I/O Terminal Blocks – XW2R Series

April 4, 2014

Omron, PLC I/O terminal blocks-XW2R series

Omron Automation & Safety announces the official Pan-American release of a new range of I/O terminal blocks for the CJ-series PLC, CS-series PLC and NJ MAC high-density I/O cards. These 32 to 64 digital I/O point modules are equipped with one or two 40-pin connectors, which can be wired to the new XW2R I/O Terminal Blocks.

For more information or to purchase your Omron XW2R Series- PLC I/O Terminal Block contact Innovative-IDM at 877-906-2100 or email us at info@iidm.com.

Omron introduces new E32-LT/LD cylindrical fiber heads with built-in lens

March 31, 2014

Omron, E32-LT/LD cylindrical fiber heads with built-in lens

The E32-LT/LD fiber series with built-in lens is the latest addition to our vast fiber optic portfolio. These new fiber units provide significant performance enhancement compared to standard fiber heads. Offered at an affordable price, they are an attractive alternative to solutions with separate lenses.

The new E32-LT/LD series contains M4 through-beams and M6 diffuse models with single-core and multi-core/high-flex fiber quality.

Contact Innovative-IDM for more information or to order your Omron E32-LT/LD cylindrical fiber heads with built-in lens at 877-906-2100 or email us at info@iidm.com.  Remember us for all of your Omron needs.