Setting Up And Auto Tuning A Yaskawa Drive
For more information visit http://www.innovativeidm.com/
Hi! My name is Jack Marsh with Innovative IDM. Today I would like to talk about how to set up and auto tune a Yaskawa variable frequency drive. Users are often ask me when I am talking to them and visiting them about how do I configure and get this thing running. The manual, as you can see, can be quite large and intimidating, but it’s really a very simple device, that has very complicated uses if you want to make it that way.
The easiest way to start is to get one of these cheat sheets that Yaskawa provides. There is one for the Microdrive family, the V1000, there’s a couple more for the A1000 family because it’s a little higher featured. So there’s more operating modes. But using the cheat sheets, it walks you through how to wire the motor, the three or four simple parameters it wants you to use, and then the actual operation of setting up and auto tuning.
If you want a little more detail, you can always get the quick start guide where there are very simple flow charts you can use. It walks you through, step by step what you need to do to get the drive up and running- very simple. And if you needed to know everything possible about every perimeter there are the big, detailed complicated manuals that will tell you everything you need to know.
If you want to get copies of the cheat sheets, or the manuals, please contact us at Innovative Idm, where anyone you talk to will be able to get you the information, or get you to someone who can. If you want PDF copies, please go to our website at Innovativeidm.com and download whatever you need. And remember, Innovative IDM is the home of the legendary customer experience.