WAGO: High Current PCB Terminal Block
The new 2716 Series High Current PCB Terminal Block features Lever-Actuated CAGE CLAMP spring pressure terminations. The convenient integrated operating lever allows for simple, intuitive terminations of conductors sized 16-6 AWG, up to 65A/600V. rather than Velocity mode. This requirement leads to the use of a servo operating in Torque mode even though a servo in Velocity mode might be recommended with an overriding torque limit. Therefore, the servo normally operates as a constant-torque drive, but if the filament breaks, the velocity is limited to the programmed value. The traversing arm is usually driven by a smaller servo.