Parker application solution: Monofilament Winder

monofilament winder

Machine Objectives:

  • Controlled tension on monofilament
  • Simple operator interface
  • High throughput

Motion Control Requirements:

  • 2 Axes of coordinated motion
  • Linear interpolation
  • Constant torque from motor

Application Solution:

The prime requirement of the bobbin drive is to provide a controlled tension, which means operating in Torque mode rather than Velocity mode. This requirement leads to the use of a servo operating in Torque mode even though a servo in Velocity mode might be recommended with an overriding torque limit. Therefore, the servo normally operates as a constant-torque drive, but if the filament breaks, the velocity is limited to the programmed value. The traversing arm is usually driven by a smaller servo.

Click here to see the full application solution from Parker. Let Innovative-IDM help you with your automation application. Give us a call at 877-906-2100 or send us an email at info@iidm.com.

Advertisements
Explore posts in the same categories: Innovative-IDM, Parker, Product Application

Tags: , , , , , ,

You can comment below, or link to this permanent URL from your own site.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: